Weight of S.S. Sheets & Plates,Weight of S.S. Circle,Weight of S.S. Pipe,Weight of S.S. Round Bar,Weight of S.S. Square Bar,Weight of S.S. Hexagonal Bar ,Weight of S.S. Flate Bar,Weight of Brass Pipe / Copper Pipe,Weight of Lead Pipe,Weight of Aluminium Pipe ,Weight of Aluminium Sheet,Weight of Conversion of Mtr to Feet ,Barlow’s Formula for calculating bursting pressure
Formula of Calculations Weight
Calculation of S.S.Sheets, Circle, Pipes, Round Bar & Flat Bar
Weight of  S.S. Sheets & Plates ::
Length ( Mtrs ) X  Width ( Mtrs ) X  Thick ( MM ) X 8 = Wt. Per PC
Length ( fit )      X  Width ( Mtrs ) X  Thick ( mm ) X ¾  = Wt. Per PC

Weight  of   S.S. Circle
Dia ( mm ) X  Dia (mm ) X  Thick ( mm ) / 160 = Gms. Per PC
Dia ( mm ) X  Dia (mm ) X  Thick ( mm ) X 0.00000063 = Kg. Per PC.

Weight of  S.S. Pipe
O.D. ( mm ) – W Thick ( mm ) X  W.Thick ( mm ) X 0.0248   = Wt. Per Mtr.
O.D. ( mm ) – W Thick ( mm ) X  W.Thick ( mm ) X 0.00758 = Wt. Per Mtr.

Weight of  S.S. Round Bar.
Dia ( mm ) X  Dia (mm ) X 0.00623  = Wt. Per. Mtr.
Dia ( mm ) X  Dia (mm ) X 0.0019    = Wt. Per. Feet.

Weight of  S.S. Square Bar
Dia ( mm ) X  Dia ( mm ) X 0.00788 = Wt. Per. Mtr
Dia ( mm ) X  Dia ( mm ) X 0.0024   =  Wt.Per. Feet.

Weight of  S.S. Hexagonal Bar
Dia ( mm )     X  Dia ( mm ) X 0.00680    =  Wt. Per.Mtr
Width ( mm ) X  Dia ( mm )  X 0.002072 =  Wt. Per Feet

Weight of  S.S. Flate Bar
Width  (mm ) X  Thick ( mm ) X 0.00798 = Wt.Per Mtr.
Width  (mm ) X  Thick ( mm ) X 0.00243 = Wt.Per Feet.

Weight of  Brass Pipe / Copper Pipe
O.D. ( mm ) – Thick ( mm ) X Thick (mm ) X 0.0260 = Wt. Per Mtr.

Weight of  Lead Pipe.
O.D. ( mm ) – Wt ( mm ) X  Wt ( mm ) X 0.0345 = Wt. Per Mtr.

Weight of Aluminium Pipe
O.D. ( mm ) – Thick ( mm ) X Thick ( mm ) X  0.0083 = Wt.Per. Mtr.

Weight of Aluminium Sheet
Length ( Mtr ) X Width ( Mtr )  X Thick ( mm ) X 2.69 = Wt.Per PC

Weight of Conversion of Mtr to Feet
Wt of 1 Mtr. 3.2808 = Wt.Per Feet.

Barlow’s Formula for calculating bursting pressure
P = 2ST/Dort – DP/2S or S – DP/2t or D = 2st/p
P = Bursting Pressure P. si.
S = Tensile Strength of tube.
T = Well Thickness  ( In Inches )
D = Outside diameter ( In Inches )
 
 
ENQUIRE NOW

Name (*)

Email (*)

Subject* (*)

Mobile / Phone (*)

Message (*)